CZ Scorpion 5.3″ Micro K Barrel

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)


Out of stock - Join the waitlist to be emailed when this product becomes available

SKU: 10074 Categories: ,


We are proud to offer a 5.3″ replacement barrel for your CZ Scorpion Evo. This barrel has been designed to work in correlation with our Micro/K handguards to reduce your Evo down into the smallest, lightest, and fastest package possible. Our barrels are machined from match grade 416 Stainless Steel blanks and finished in black nitride. They are chambered 9×19 and twist rate is 1:10. The muzzle end is threaded 1/2-28. Designed and Manufactured completely in USA. 922r Compliant.

GUNSMITH INSTALLATION IS HIGHLY RECOMMENDED. The Scorpion Evo family of firearms span several generations (Gen1, Gen2, ect…) and the trunnions to which the barrels mate are not clocked/timed. This means that each barrel must be paired exclusively to the trunnion/upper receiver in which it will be used. As such, our barrels DO NOT have an extractor notch milled into the chamber. This notch must be machined and matched directly to the trunnion in YOUR Scorpion Evo. Please see our video below for more info. Please note that this barrel does NOT work with factory handguards (pistol or carbine).

  • 5.3″ Micro/K Barrel for CZ Scorpion
  • 416R Stainless
  • Black Nitride Coated
  • 1/2-28 Threaded Muzzle
  • 922R Compliant, Made in USA

1 review for CZ Scorpion 5.3″ Micro K Barrel

  1. Rated 5 out of 5

    Jason Sforza

    Not really a review but a question. Video states barrel torque spec is 8Nm. That equates to 5 ft lbs. I believe what was meant was 88Nm or 65 ft lbs

    • hbishop

      Yes, you are correct. The tech in our video mis-spoke, the correct torque is up to 65 ft*lbs. When installing barrels into the trunnions the shoulder of the barrel physically stops at the trunnion face, CZ does not supply an “official” torque spec, but we have our wrenches set to 65 ft*lbs because that seems to over come any stick-tion in the threads or locking compound and ensures that the barrel shoulder is flush and tight to the trunnion.

Add a review

Your email address will not be published. Required fields are marked *