Description
Replacement pistol grip for the CZ Scorpion Evo 3 and 3+ designed by Yeti Wurks (Gen 3). This grip is injection molded polymer and features a more vertical angle over the factory grip, allowing the user to tuck their elbow in for a more compact stance when operating the weapon. The aggressive texturing and two interchangeable backstraps (large and small) allow the user to dial in the ergonomics even further. Grips are hollow and come complete with a base plug that allows the grip body itself to be utilized as a storage compartment.
- Yeti Wurks Switchback Gen 3 Grip
- Fits all CZ Scorpion EVO 3 and 3+ Pistols and Carbine Models
- Interchangeable Backstraps
- Made in USA, 922R compliant
Gunsmith Installation Recommended for All Parts.
David –
Has no real friction or grip. Very slick but does a great job of changing the grip angle. I hope talon grips makes a grip for this one. They do for some of the others.
kody31 –
It fixes the angle problem, but I personally don’t think it’s a comfortable grip. At all. I’m not sure who thought a square grip would be more comfortable than a rounded grip. Also the plastic was SLIGHTLY warped where it slides onto the lower. Just enough to make this 45 second project an annoying 5 minute project.
Ron –
Love this grip. Complete changes the feel of the Scorpion with the more vertical angle. Nicely made and fits perfectly. If you’re familiar with Magpul MOE grips you’ll feel right at home.
Mario –
Fantastic grip. It’s a much needed improvement over the stock grip.
Jerrett (verified owner) –
This may be the best aftermarket part and upgrade I have done to my Scorpion so far. This grip made the gun much more pleasant to shoot and it’s incredibly ergonomic, much more than I had anticipated. I also installed an HB instustries trigger and I HIGHLY reccomend that as well.
Chris (verified owner) –
What a huge difference over stock. I love this grip and the angle is perfect! Easy install and huge upgrade! Get one you won’t regret it.
Kenneth R Noe (verified owner) –
Grip is comfortable and definitely better than the factory one. With 2 different backstraps, it gives you more options. Best grip I’ve tried so far. (3rd one I’ve tried. )
Krh HouTX (verified owner) –
Like kody31 above, the screw will not align with the nut. It is off just enough and there are so few threads to engage, I’m about to strip the small screw. I can look through the nut and see the alignment issue. I guess I can start grinding on something somewhere.
Bryan Reeves (verified owner) –
Love it. Comfortable, but the main reason I got it is because the cap at the bottom. Allows for extra batteries for my sight, but mainly I plan on putting a copy of my suppressor paperwork inside it, that way I can always have it with the gun I’m putting my suppressor on (once my paperwork is finalized)
Julian –
Excellent grip. Huge upgrade over the stock. I had to use the factory screw instead of the one they provided and it was no problem. Highly recommend!
reyes.nathaniel89 (verified owner) –
Awesome grip over the stock one by far. Was able to put on the large back strap that comes with it (comes with a small and a large one) and it feels MUCH better by far. Also, unlike the gen2 version of this, you’re able to pull out the complete lower without having to take this off which is great! Highly recommended.
Carbineguy1985 (verified owner) –
Good grip, got it solely because it was available in grey to match my scorpion, it’s comfortable to a certain point. I do not like the fact it is squared in the front otherwise I would give it five stars
jerpau20 (verified owner) –
Excellent fit and feel. For those stating the screw doesn’t line up….. I had this problem briefly…. Try lightly, I mean very lightly bumping the grip up tighter onto the receiver w a rubber mallet after its slid onto the extension. Then look thru the hole with a light behind it, line it up and start the screw into the nut through the grip, then bump the grip with a mallet lightly towards the muzzle , tighten the screw when it’s correctly positioned . Works easier with the lower removed.
I love it. Much more comfortable than any AR grip I’ve used elsewhere. Excellent compartment for storage and love the swappable rear straps. Great product.
Jake (verified owner) –
I wanted a more vertical grip to replace the factory and I got this instead of Magpul because I wanted OD to match my gun. In my opinion, this is less comfortable than the factory grip. Even with the smaller backstrap, the grip is uncomfortably large for my medium-small hands. Additionally, it is very rectangular which I do not find comfortable. I also do not like the fact that the backstraps are held in place by a roll-pin. I would have preferred a push pin or a toolless design of some sort. Worst of all, the grip I received is too wide and actually interferes with the safety, making it tough and gritty to dis/engage the safety. I don’t trust that one bit. I don’t think this is worth $40, but it gets 2 stars because it is functional, you could modify it to fix the safety issue, and the texturing is better than the factory one. I think I will be returning mine and reinstalling the factory grip for the time being. Hopefully, Magpul will come out with an OD version of their grip.
Laredo Gonzalez (verified owner) –
Good general look, good color matching and fill the hand good . However, it does interfere with the safety (unless you migrate to ak style, great btw) and there is some misalignment of the screw which may be also too short or the female is not fully seated or both. After installed went back to original after noticing some wobbling in the trigger group.
David Castro (verified owner) –
Love the feel of it and secret stash spot for my goodies … eze 5 stars
Derald (verified owner) –
Love the OD Green color and vertical angle but as others described uncomfortable due to block design. The Backstrap has slick edges and combined with the block design doesn’t allow for positive purchase. Your palms will slip off grip. Recommend offering more grippy Backstrap with rounded design.
Tony Salter (verified owner) –
For me, this grip is perfect and comfortable. Changes my grip and angle enough that the safety switch thumb rub is a non issue.
George N Despotides (verified owner) –
I decided on the YetiWurks pistol grip after researching the other available grips on the market. Feel, construction, & size were all considered. Having two back straps to choose from, & size played the biggest role in my choice. You still get a better angle, & the grip feel isn’t that bad. Well built, & fairly easy install. The grip seemed a little wider than the factory grip, & the safety selector felt as if it dragged some what. I replaced the safety R/side with the HB Delete Kit, & lightly hand filed the under side of the L/side safety Selector, which took care of the issues.
Sgt. Buff (verified owner) –
Sgt. Buff here. For all you CZ scorpion EVO 3 owners out there the yeti is your best fit and best bet 4 the CZ scorpion EVO 3 S1 carbine for the CZ scorpion Evo 3 S2 the Magpul grip is your best bet. So far…all HB Industries upgrades I’ve done to both my Scorpions have been spectacular and a full-on on point!
Believe me…”Shooter”
SSgt. C.J.B.
USAF/Ret./DAV
Cole Severns (verified owner) –
Like every other pistol grip out there available for the scorpion, there are pros and cons to it. What I like about it is the overall look, it makes the scorpion look a little meaner; the fact that you have two different backstraps so it’s almost like 2 grips in one; and the storage compartment. What I don’t like is the fact that it has the ergonomics of a 2×4 and that there’s no aggressive texturing. I replaced my Magpul evo grip with this one, the Magpul feels a little better but doesn’t look very good plus there’s no storage inside of it. So if you’re going for aesthetics and you need a storage space in your grip, then look no further.
Dave T. (verified owner) –
Fit perfect, nice improvement from factory grip. Had to file a small amount off back side of safety. No big deal.
West Short –
I love my EVO 3 S2 but I hated the stock grip, which was at the wrong angle for my comfort. I love this grip, and particularly the rounded back strap, which is interchangeable with a flat back strap. Way easy to install.